Numerous changes to toolchain optional packages and world default packages

bin/head - accept -[num] style arguments
usr.bin/uname - alias -o to -s

Makefile

@@ -33,13 +33,13 @@ rootfs-tbz: rootfs-hhl-${os_version}-${arch}.tbz
 rootfs-txz: rootfs-hhl-${os_version}-${arch}.txz
 
 toolchain-hhl-${os_version}-${arch}.tgz: /toolchain/.built smalltools
-	cd build && tar -czf ../$@ toolchain
+	cd build && paxtar -M uidgid -czf ../$@ toolchain
 
 toolchain-hhl-${os_version}-${arch}.tbz: /toolchain/.built smalltools
-	cd build && tar -cjf ../$@ toolchain
+	cd build && paxtar -M uidgid -cjf ../$@ toolchain
 
 toolchain-hhl-${os_version}-${arch}.txz: /toolchain/.built smalltools
-	cd build && tar -cJf ../$@ toolchain
+	cd build && paxtar -M uidgid -cJf ../$@ toolchain
 
 smalltools: /toolchain/.built
 	$(MAKE) -C toolchain reduce-size
@@ -47,7 +47,7 @@ smalltools: /toolchain/.built
 buildtools: /toolchain/.built
 	$(info $(grn)=== Temporary toolchain build ===$(reset))
 
-/toolchain/.built: | $(dirs)
+/toolchain/.built: config.mk | $(dirs)
 	$(info $(grn)=== Building temporary toolchain ===$(reset))
 	$(MAKE) -C toolchain
 	touch $@
@@ -67,12 +67,12 @@ buildworld: $(build)/.built $(plists)
 strip: $(build)/.stripped
 
 $(build)/.stripped:
-	for dir in ${stripdirs} ; \
+	for dir in $(stripdirs) ; \
-		do /toolchain/bin/strip --strip-debug $${dir}/* > \
+		do $(arch)-strip --strip-debug $${dir}/* > \
 			/dev/null 2>&1 || true ; done
 	touch $@
 
-$(build)/.built: $(build)/.skeleton.built
+$(build)/.built: /toolchain/.built $(build)/.skeleton.built
 	$(MAKE) -C world
 	touch $@
 
@@ -96,13 +96,13 @@ remove-toolchain:
 	$(MAKE) -C toolchain remove
 
 rootfs-hhl-$(os_version)-$(arch).tgz: $(plists) $(build)/.stripped
-	cd build && tar -czf ../$@ $(alldirs)
+	cd build && paxtar -M uidgid -czf ../$@ $(alldirs)
 
 rootfs-hhl-$(os_version)-$(arch).tbz: $(plists) $(build)/.stripped
-	cd build && tar -cjf ../$@ $(alldirs)
+	cd build && paxtar -M uidgid -cjf ../$@ $(alldirs)
 
 rootfs-hhl-$(os_version)-$(arch).txz: $(plists) $(build)/.stripped
-	cd build && tar -cJf ../$@ $(alldirs)
+	cd build && paxtar -M uidgid -cJf ../$@ $(alldirs)
 
 clean:
 	$(MAKE) -C world clean

config.mk.sample

@@ -9,6 +9,10 @@
 # riscv64 (SiFive Unmatched, BeagleV)
 arch = x86_64
 
+# If building for rpi3/4 we can automatically configure and build u-boot
+# by setting rpi to 1
+# rpi = 1
+
 # Maximum make threads to run concurrently. For some packages on some
 # architectures this will be automatically overridden.
 makeflags = -j8
@@ -16,9 +20,22 @@ makeflags = -j8
 # Optional bootstrap packages. HitchHiker ships with BSD paxtar, and it's syntax
 # is used rather than GNU tar in certain places. To bootstrap on systems other
 # than HitchHiker it is a good idea to set build_pax to 1.
-#
+build_pax = 1
+
 # Similarly, GNU awk (gawk) is a build time dependency of Glibc, but HitchHiker
 # ships with The One True Awk. By setting build_gawk to 1, we build a temporary
 # gawk which will only exist in /toolchain
-build_pax = 1
 build_gawk = 1
+
+# If building on HitchHiker, Perl will need to be built as it is used repeatedly
+# during the build of other packages. If perl is installed via pkgsrc this can
+# be skipped.
+build_perl = 1
+
+# If building on HitchHiker, intltool is not part of the base system as it
+# depends on the XML::Parser perl module.
+build_intltool = 1
+
+# Again, if building on HitchHiker, Python must be built either here or via
+# pkgsrc.
+build_python = 1

distfiles/Makefile

@@ -516,6 +516,8 @@ tzdata${tzdata_version}.tar.gz:
 	wget -c https://www.iana.org/time-zones/repository/releases/$@
 
 u-boot: u-boot-$(u-boot_version).tar.bz2
+
+u-boot-$(u-boot_version).tar.bz2:
 	wget -c ftp://ftp.denx.de/pub/u-boot/$@
 
 udev-lfs: udev-lfs-${udev-lfs_version}.tar.xz

toolchain/Makefile

@@ -4,15 +4,22 @@
 
 include toolchain.mk
 
-subdirs += binutils
-subdirs += gcc-pass1
-subdirs += linux-headers
 ifeq ($(build_gawk), 1)
 subdirs += gawk
 endif
 ifeq ($(build_pax), 1)
 subdirs += pax
 endif
+ifeq ($(build_perl), 1)
+subdirs += perl
+subdirs += xml-parser
+endif
+ifeq ($(build_python), 1)
+subdirs += python
+endif
+subdirs += binutils
+subdirs += gcc-pass1
+subdirs += linux-headers
 subdirs += glibc
 subdirs += gcc-pass2
 

toolchain/gawk/Makefile

@@ -2,6 +2,6 @@
 #  Copyright 2020 Nathan Fisher <nfisher.sr@gmail.com>
 #
 distname = gawk
-include world.mk
+include toolchain.mk
 config_opts += --disable-nls
 include targets.mk

toolchain/intltool/Makefile

@@ -0,0 +1,9 @@
+#  Makefile - hhl - /usr/src/world/intltool
+#  Copyright 2020 Nathan Fisher <nfisher.sr@gmail.com>
+#
+distname      = intltool
+distext       = gz
+patches       = intltool-perl-warning.patch
+include toolchain.mk
+
+include targets.mk

toolchain/intltool/intltool-perl-warning.patch

@@ -0,0 +1,51 @@
+diff -Naur intltool-0.51.0.orig/intltool-update.in intltool-0.51.0/intltool-update.in
+--- intltool-0.51.0.orig/intltool-update.in	2015-03-08 21:39:54.000000000 -0400
++++ intltool-0.51.0/intltool-update.in	2020-05-31 18:49:45.382651247 -0400
+@@ -1062,13 +1062,13 @@
+ 	}
+     }
+ 
+-    if ($str =~ /^(.*)\${?([A-Z_]+)}?(.*)$/)
++    if ($str =~ /^(.*)\$\{?([A-Z_]+)}?(.*)$/)
+     {
+ 	my $rest = $3;
+ 	my $untouched = $1;
+ 	my $sub = "";
+         # Ignore recursive definitions of variables
+-        $sub = $varhash{$2} if defined $varhash{$2} and $varhash{$2} !~ /\${?$2}?/;
++        $sub = $varhash{$2} if defined $varhash{$2} and $varhash{$2} !~ /\$\{?$2}?/;
+ 
+ 	return SubstituteVariable ("$untouched$sub$rest");
+     }
+@@ -1190,10 +1190,10 @@
+ 	$name    =~ s/\(+$//g;
+ 	$version =~ s/\(+$//g;
+ 
+-	$varhash{"PACKAGE_NAME"} = $name if (not $name =~ /\${?AC_PACKAGE_NAME}?/);
+-	$varhash{"PACKAGE"} = $name if (not $name =~ /\${?PACKAGE}?/);
+-	$varhash{"PACKAGE_VERSION"} = $version if (not $name =~ /\${?AC_PACKAGE_VERSION}?/);
+-	$varhash{"VERSION"} = $version if (not $name =~ /\${?VERSION}?/);
++	$varhash{"PACKAGE_NAME"} = $name if (not $name =~ /\$\{?AC_PACKAGE_NAME}?/);
++	$varhash{"PACKAGE"} = $name if (not $name =~ /\$\{?PACKAGE}?/);
++	$varhash{"PACKAGE_VERSION"} = $version if (not $name =~ /\$\{?AC_PACKAGE_VERSION}?/);
++	$varhash{"VERSION"} = $version if (not $name =~ /\$\{?VERSION}?/);
+     }
+ 
+     if ($conf_source =~ /^AC_INIT\(([^,\)]+),([^,\)]+)[,]?([^,\)]+)?/m)
+@@ -1219,11 +1219,11 @@
+ 	$version =~ s/\(+$//g;
+         $bugurl  =~ s/\(+$//g if (defined $bugurl);
+ 
+-	$varhash{"PACKAGE_NAME"} = $name if (not $name =~ /\${?AC_PACKAGE_NAME}?/);
+-	$varhash{"PACKAGE"} = $name if (not $name =~ /\${?PACKAGE}?/);
+-	$varhash{"PACKAGE_VERSION"} = $version if (not $name =~ /\${?AC_PACKAGE_VERSION}?/);
+-	$varhash{"VERSION"} = $version if (not $name =~ /\${?VERSION}?/);
+-        $varhash{"PACKAGE_BUGREPORT"} = $bugurl if (defined $bugurl and not $bugurl =~ /\${?\w+}?/);
++	$varhash{"PACKAGE_NAME"} = $name if (not $name =~ /\$\{?AC_PACKAGE_NAME}?/);
++	$varhash{"PACKAGE"} = $name if (not $name =~ /\$\{?PACKAGE}?/);
++	$varhash{"PACKAGE_VERSION"} = $version if (not $name =~ /\$\{?AC_PACKAGE_VERSION}?/);
++	$varhash{"VERSION"} = $version if (not $name =~ /\$\{?VERSION}?/);
++        $varhash{"PACKAGE_BUGREPORT"} = $bugurl if (defined $bugurl and not $bugurl =~ /\$\{?\w+}?/);
+     }
+ 
+     # \s makes this not work, why?

toolchain/perl/Makefile

@@ -0,0 +1,21 @@
+#  Makefile - hhl - /usr/src/world/perl
+#  Copyright 2020 Nathan Fisher <nfisher.sr@gmail.com>
+#
+distname           = perl
+export BUILD_ZLIB  = False
+export BUILD_BZIP2 = 0
+
+config_opts        = -des
+config_opts       += -Dmksymlinks
+config_opts       += -Dprefix=/toolchain
+config_opts       += -Dvendorprefix=/usr
+config_opts       += -Dman1dir=/toolchain/share/man/man1
+config_opts       += -Dman3dir=/toolchain/share/man/man3
+config_opts       += -Duseshrplib
+config_opts       += -Dusethreads
+
+include toolchain.mk
+
+config_cmd         = cd $(objdir) && $(srcdir)/Configure $(config_opts)
+
+include targets.mk

toolchain/python/Makefile

@@ -0,0 +1,15 @@
+#  Makefile - hhl - /usr/src/world/python
+#  Copyright 2020 Nathan Fisher <nfisher.sr@gmail.com>
+#
+distname      = python
+include versions.mk
+distfullname  = Python-$(python_version)
+include toolchain.mk
+
+config_opts  += --enable-ipv6
+config_opts  += --enable-shared
+config_opts  += --with-system-expat
+config_opts  += --with-system-ffi
+config_opts  += --with-ensurepip=yes
+
+include targets.mk

toolchain/xml-parser/Makefile

@@ -0,0 +1,9 @@
+#  Makefile - hhl - /usr/src/world/xml-parser
+#  Copyright 2020 Nathan Fisher <nfisher.sr@gmail.com>
+#
+distname   = XML-Parser
+distext    = gz
+no_objdir  = 1
+include toolchain.mk
+config_cmd = cd $(srcdir) && perl Makefile.PL
+include targets.mk

world/Makefile

@@ -40,20 +40,20 @@ subdirs += gdbm
 subdirs += pcre
 subdirs += zsh
 subdirs += inetutils
-subdirs += perl
+#subdirs += perl
 subdirs += autoconf
 subdirs += automake
 subdirs += gperf
 subdirs += expat
 #subdirs += xml-parser
-subdirs += intltool
+#subdirs += intltool
 subdirs += kmod
 subdirs += gettext
 subdirs += elfutils
 subdirs += libffi
 subdirs += libressl
 subdirs += wget
-subdirs += python
+#subdirs += python
 #subdirs += ninja
 #subdirs += meson
 subdirs += findutils
@@ -75,16 +75,22 @@ subdirs += execline
 subdirs += s6
 subdirs += s6-rc
 subdirs += s6-linux-init
-#subdirs += udev-lfs
+subdirs += s6-scripts
+subdirs += udev-lfs
 subdirs += bin
 subdirs += sbin
 subdirs += usr.bin
 subdirs += usr.sbin
 subdirs += $(kernel)
 
-ifeq ($(arch),x86,64)
+ifeq ($(arch),x86_64)
-#subdirs += grub
+subdirs += grub
+else ifeq ($(arch),aarch64)
+ifeq ($(rpi),1)
+subdirs += u-boot-rpi64
 endif
+endif
+
 ifeq ($(_dhcpcd),1)
 subdirs += dhcpcd
 endif

world/bin/env/Makefile

@@ -1,6 +1,11 @@
 #  Makefile - hhl - /usr/src/world/bin/env
 #  Copyright 2020 Nathan Fisher <nfisher.sr@gmail.com>
-#  
+#
 progname  = env
 onestage  = true
 include hhl.cprog.openbsd.mk
+
+install: | $(DESTDIR)/usr/bin/env
+
+$(DESTDIR)/usr/bin/env:
+	ln -s ../../bin/env $@

world/bin/head/src/head.c

@@ -26,9 +26,10 @@
  *
  */
 
-#define _GNU_SOURCE // getline, getopt
+#define _GNU_SOURCE   // getline, getopt
 
 #include <ctype.h>    // isprint
+#include <err.h>      // err
 #include <inttypes.h> // uint*_t
 #include <libgen.h>   // basename
 #include <stdio.h>    // fclose, fopen, getline, nread, perror, printf
@@ -36,16 +37,15 @@
 #include <string.h>   // strcmp
 #include <unistd.h>   // getopt
 
-uint8_t cflag = 0, qflag = 0, vflag = 0;
+uint8_t cflag = 0, nflag = 0, qflag = 0, vflag = 0;
-int  lines = 10, j = 0;
+int lines = 10, j = 0, chars = 0;
 static const char *__progname;
 
 static void usage() {
-  fprintf(stderr,
+  fprintf(stderr, "Usage: %s [-hqv] [-c count] [-n lines] [FILE]...\n", __progname);
-      "Usage: %s [-hcqv] [-n number] [FILE]...\n", __progname);
 }
 
-void _head(char * file) {
+void _head(char *file) {
   FILE *fp;
   char *line = NULL;
   size_t len = 0;
@@ -65,11 +65,11 @@ void _head(char * file) {
     else
       printf("==> %s <==\n", file);
   }
-  if (cflag) {
+  if (cflag && !nflag) {
     while (!feof(fp)) {
       putchar(fgetc(fp));
       i++;
-      if (i>= lines)
+      if (i >= chars)
         break;
     }
   } else {
@@ -83,7 +83,7 @@ void _head(char * file) {
   }
   if (strcmp(file, "-") != 0) {
     fclose(fp);
-  j = 1;
+    j = 1;
   }
 }
 
@@ -91,10 +91,25 @@ int main(int argc, char *argv[]) {
   int c, index;
   __progname = basename(argv[0]);
 
-  while ((c = getopt(argc, argv, "chqvn:")) != -1)
+  /* Handle the old school -[0-9] style options */
+  if ((argv[1])[0] == '-' && isdigit((argv[1])[1])) {
+    char *x;
+    x = argv[1] + 1;
+    int i;
+    for (i = 0; i < sizeof(argv[1]); i++) {
+      if (!isdigit(x[i])) {
+        x[i] = '\0';
+        break;
+      }
+    }
+    lines = (int)strtol(x, NULL, 10);
+  }
+
+  while ((c = getopt(argc, argv, "c:hqvn:0123456789")) != -1)
     switch (c) {
     case 'c':
       cflag = 1;
+      chars = (int)strtol(optarg, NULL, 10);
       break;
     case 'q':
       qflag = 1;
@@ -108,7 +123,19 @@ int main(int argc, char *argv[]) {
       usage();
       exit(EXIT_SUCCESS);
     case 'n':
-      lines = strtol(optarg, NULL, 10);
+      nflag = 1;
+      lines = (int)strtol(optarg, NULL, 10);
+      break;
+    case '0':
+    case '1':
+    case '2':
+    case '3':
+    case '4':
+    case '5':
+    case '6':
+    case '7':
+    case '8':
+    case '9':
       break;
     default:
       usage();
@@ -117,7 +144,7 @@ int main(int argc, char *argv[]) {
 
   if (argv[optind] == NULL)
     _head("-");
-  
+
   if (argv[optind + 1] != NULL && (!qflag))
     vflag = 1;
 

world/binutils/Makefile

@@ -1,9 +1,11 @@
 #  Makefile - hhl - /usr/src/world/binutils
 #  Copyright 2020 Nathan Fisher <nfisher.sr@gmail.com>
-#  
+#
 distname     = binutils
 include world.mk
 
+install_cmd   = $(MAKE) DESTDIR=$(DESTDIR) -C $(objdir) install || true
+
 config_opts += --host=$(tgt)
 config_opts += --target=$(tgt)
 config_opts += --with-build-sysroot=$(DESTDIR)

world/fs_skeleton/etc/zshenv.d/pkgsrc.zsh

@@ -18,6 +18,5 @@ fi
 if [ -x /usr/pkg/share/info ]
   then INFOPATH=/usr/pkg/share/info:${INFOPATH}
 fi
-PKG_PATH=https://hitchhiker-linux.org/pub/${OS_VERSION}/${arch}/packages
+export PATH PKG_CONFIG_PATH MANPATH INFOPATH
-export PATH PKG_CONFIG_PATH MANPATH INFOPATH PKG_PATH
 

world/grub/Makefile

@@ -1,6 +1,6 @@
 #  Makefile - hhl - /usr/src/world/grub
 #  Copyright 2020 Nathan Fisher <nfisher.sr@gmail.com>
-#  
+#
 distname     = grub
 include world.mk
 
@@ -9,6 +9,6 @@ config_opts += --sysconfdir=/etc
 config_opts += --disable-efiemu
 config_opts += --disable-werror
 
-post_install = mv -v /etc/bash_completion.d/grub /usr/share/bash-completion/completions
+post_install = mv -v $(DESTDIR)/etc/bash_completion.d/grub $(DESTDIR)/usr/share/bash-completion/completions
 
 include targets.mk

world/modules-load/Makefile

@@ -0,0 +1,5 @@
+#  Makefile - hhl - /src/world/bin/s6-scripts
+#  Copyright 2021 Nathan Fisher <nfisher.sr@gmail.com>
+#
+progname      = modules-load
+include hhl.script.mk

world/modules-load/man/modules-load.8

@@ -0,0 +1,52 @@
+.Dd June 1, 2016
+.Dt MODULES-LOAD 8
+.Os Linux
+.Sh NAME
+.Nm modules-load
+.Nd Configure kernel modules to load at boot
+.Sh SYNOPSIS
+.Nm modules-load
+.Op Fl nv
+.Sh DESCRIPTION
+.Nm
+reads files which contain kernel modules to load during boot from the list of
+locations below.
+.Bl -tag -width indent
+.It Fl n
+dry-run mode.
+This option does everything but actually insert or delete the modules.
+.It Fl v
+verbose mode.
+Print messages about what the program is doing.
+.El
+.Sh FILES
+Configuration files are read from the following locations:
+.Bl -tag -width indent
+.It /etc/modules-load.d/*.conf
+.It /run/modules-load.d/*.conf
+.It /usr/lib/modules-load.d/*.conf
+.El
+.Pp
+The configuration files should simply contain a list of kernel module names
+to load, separated by newlines.
+Empty lines and lines whose first non-whitespace character is # or ; are
+ignored.
+.Sh EXAMPLES
+.Pa /etc/modules-load.d/virtio-net.conf :
+.Bd -literal -offset indent
+# Load virtio-net.ko at boot
+virtio-net
+.Ed
+.Sh SEE ALSO
+.Xr modprobe 8
+.Sh HISTORY
+This program is a replacement for the
+.Nm modules-load
+utility provided by
+.Nm systemd .
+.Sh AUTHOR
+.An Leah Neukirchen ,
+.Mt leah@vuxu.org .
+.Sh LICENSE
+.Nm
+is in the public domain.

world/modules-load/src/modules-load.sh

@@ -0,0 +1,19 @@
+#!/bin/sh
+# modules-load [-n] [-v] - modules-load.d(5) compatible kernel module loader
+
+export PATH=/bin:/sbin
+
+{
+# Parameters passed as modules-load= or rd.modules-load= in kernel command line.
+sed -nr 's/,/\n/;s/(.* |^)(rd\.)?modules-load=([^ ]*).*/\3/p' /proc/cmdline
+
+# Find files /{etc,run,usr/lib}/modules-load.d/*.conf in that order.
+find -L /etc/modules-load.d /run/modules-load.d /usr/lib/modules-load.d \
+       	-maxdepth 1 -name '*.conf' -printf '%p %P\n' 2>/dev/null |
+# Load each basename only once.
+	sort -k2 -s | uniq -f1 | cut -d' ' -f1 |
+# Read the files, output all non-empty, non-comment lines.
+	tr '\012' '\0' | xargs -0 -r grep -h -v -e '^[#;]' -e '^$'
+} |
+# Call modprobe on the list of modules
+tr '\012' '\0' | xargs -0 -r modprobe -ab "$@"

world/s6-linux-init/Makefile

@@ -1,12 +1,12 @@
 #  Makefile - hhl - /usr/src/world/s6-linux-init
 #  Copyright 2020 Nathan Fisher <nfisher.sr@gmail.com>
-#  
+#
 distname     = s6-linux-init
 distext      = gz
 no_objdir    = 1
 include world.mk
 export CFLAGS = --sysroot=$(DESTDIR)
 config_opts  += --host=$(tgt)
-config_opts += --skeldir=/etc/s6-linux-init/skel
+config_opts += --skeldir=/etc/s6/skel
 config_opts  += --with-sysdeps=$(libdir)/skalibs/sysdeps
 include targets.mk

world/s6-scripts/Makefile

@@ -0,0 +1,20 @@
+#  Makefile - hhl - /src/world/bin/s6-scripts
+#  Copyright 2021 Nathan Fisher <nfisher.sr@gmail.com>
+#
+progname      = init
+include hhl.script.mk
+
+sysctl_libdir = $(DESTDIR)/usr/lib/sysctl.d
+
+install: $(sysctl_libdir)/50-default.conf install_conf
+
+$(sysctl_libdir)/50-default.conf: data/50-default.conf | $(sysctl_libdir)
+	install -m644 $< $@
+
+install_conf:
+	cp -R etc $(DESTDIR)
+
+$(sysctl_libdir):
+	install -d $@
+
+.PHONY: install_conf

world/s6-scripts/data/50-default.conf

@@ -0,0 +1,42 @@
+# See sysctl.d(5) and core(5) for documentation.
+
+# System Request functionality of the kernel (SYNC)
+#
+# Use kernel.sysrq = 1 to allow all keys.
+# See https://www.kernel.org/doc/html/latest/admin-guide/sysrq.html for a list
+# of values and keys.
+kernel.sysrq = 16
+
+# Append the PID to the core filename
+kernel.core_uses_pid = 1
+
+# Source route verification
+net.ipv4.conf.default.rp_filter = 2
+-net.ipv4.conf.all.rp_filter = 1
+
+# Do not accept source routing
+net.ipv4.conf.default.accept_source_route = 0
+-net.ipv4.conf.all.accept_source_route = 0
+
+# Promote secondary addresses when the primary address is removed
+net.ipv4.conf.default.promote_secondaries = 1
+-net.ipv4.conf.all.promote_secondaries = 1
+
+# ping(8) without CAP_NET_ADMIN and CAP_NET_RAW
+# The upper limit is set to 2^31-1. Values greater than that get rejected by
+# the kernel because of this definition in linux/include/net/ping.h:
+#   #define GID_T_MAX (((gid_t)~0U) >> 1)
+# That's not so bad because values between 2^31 and 2^32-1 are reserved on
+# systemd-based systems anyway: https://systemd.io/UIDS-GIDS.html#summary
+-net.ipv4.ping_group_range = 0 2147483647
+
+# Fair Queue CoDel packet scheduler to fight bufferbloat
+net.core.default_qdisc = fq_codel
+
+# Enable hard and soft link protection
+fs.protected_hardlinks = 1
+fs.protected_symlinks = 1
+
+# Enable regular file and FIFO protection
+fs.protected_regular = 1
+fs.protected_fifos = 1

world/s6-scripts/etc/s6/current/run-image/service/.s6-svscan/SIGINT

@@ -0,0 +1,3 @@
+#!/sbin/execlineb -P
+
+s6-linux-init-shutdown -a -r -- now

world/s6-scripts/etc/s6/current/run-image/service/.s6-svscan/SIGPWR

@@ -0,0 +1,3 @@
+#!/sbin/execlineb -P
+
+s6-linux-init-shutdown -a -p -- now

world/s6-scripts/etc/s6/current/run-image/service/.s6-svscan/SIGQUIT

@@ -0,0 +1,2 @@
+#!/sbin/execlineb -P
+

world/s6-scripts/etc/s6/current/run-image/service/.s6-svscan/SIGTERM

@@ -0,0 +1,2 @@
+#!/sbin/execlineb -P
+

world/s6-scripts/etc/s6/current/run-image/service/.s6-svscan/SIGUSR1

@@ -0,0 +1,3 @@
+#!/sbin/execlineb -P
+
+s6-linux-init-shutdown -a -p -- now

world/s6-scripts/etc/s6/current/run-image/service/.s6-svscan/SIGUSR2

@@ -0,0 +1,3 @@
+#!/sbin/execlineb -P
+
+s6-linux-init-shutdown -a -h -- now

world/s6-scripts/etc/s6/current/run-image/service/.s6-svscan/SIGWINCH

@@ -0,0 +1,2 @@
+#!/sbin/execlineb -P
+

world/s6-scripts/etc/s6/current/run-image/service/.s6-svscan/crash

@@ -0,0 +1,6 @@
+#!/sbin/execlineb -P
+
+redirfd -w 2 /dev/console
+fdmove -c 1 2
+foreground { s6-linux-init-echo -- "s6-svscan crashed. Rebooting." }
+s6-linux-init-hpr -fr

world/s6-scripts/etc/s6/current/run-image/service/.s6-svscan/finish

@@ -0,0 +1,6 @@
+#!/sbin/execlineb -P
+
+redirfd -w 2 /dev/console
+fdmove -c 1 2
+foreground { s6-linux-init-echo -- "s6-svscan exited. Rebooting." }
+s6-linux-init-hpr -fr

world/s6-scripts/etc/s6/current/run-image/service/s6-linux-init-early-getty/run

@@ -0,0 +1,3 @@
+#!/sbin/execlineb -P
+
+/sbin/agetty -L -8 tty1 115200

world/s6-scripts/etc/s6/current/run-image/service/s6-linux-init-runleveld/notification-fd

@@ -0,0 +1 @@
+3

world/s6-scripts/etc/s6/current/run-image/service/s6-linux-init-runleveld/run

@@ -0,0 +1,7 @@
+#!/sbin/execlineb -P
+
+fdmove -c 2 1
+fdmove 1 3
+s6-ipcserver -1 -a 0700 -c 1 -- s
+s6-sudod -dt30000 --
+"/etc/s6/current"/scripts/runlevel

world/s6-scripts/etc/s6/current/run-image/service/s6-linux-init-shutdownd/run

@@ -0,0 +1,3 @@
+#!/sbin/execlineb -P
+
+s6-linux-init-shutdownd -c "/etc/s6/current" -g 3000

world/s6-scripts/etc/s6/current/run-image/service/s6-svscan-log/notification-fd

@@ -0,0 +1 @@
+3

world/s6-scripts/etc/s6/current/run-image/service/s6-svscan-log/run

@@ -0,0 +1,5 @@
+#!/sbin/execlineb -P
+
+fdmove -c 1 2
+redirfd -rnb 0 fifo
+s6-log -bpd3 -- 1 t /run/uncaught-logs

world/s6-scripts/etc/s6/current/scripts/rc.init

@@ -0,0 +1,49 @@
+#!/bin/sh -e
+
+rl="$1"
+shift
+
+### argv now contains the arguments of the kernel command line that are
+### not of the form key=value. (The key=value arguments were stored by
+### s6-linux-init into an envdir, if instructed so via the -s option.)
+### Normally this argv remains unused because programs that need the
+### kernel command line usually read it later on from /proc/cmdline -
+### but just in case, it's available here.
+
+
+### 1. Early preparation
+### This is done only once at boot time.
+### Ideally, this phase should just initialize the service manager.
+
+### If your services are managed by sysv-rc:
+# /etc/init.d/rcS
+
+### If your services are managed by OpenRC:
+# /sbin/openrc sysinit
+# /sbin/openrc boot
+
+### If your services are managed by s6-rc:
+### (replace /run/service with your scandir)
+s6-rc-init -c /etc/s6/rc/compiled /run/service
+
+
+### 2. Starting the wanted set of services
+### This is also called every time you change runlevels with telinit.
+### (edit the location to suit your installation)
+### By default, $rl is the string "default", unless you changed it
+### via the -D option to s6-linux-init-maker.
+### Numeric arguments from 1 to 5 on the kernel command line will
+### override the default.
+
+exec /etc/s6/current/scripts/runlevel "$rl"
+
+
+### If this script is run in a container, then 1. and 2. above do not
+### apply and you should just call your CMD, if any, or let your
+### services run.
+### Something like this:
+
+# if test -z "$*" ; then return 0 ; fi
+# $@
+# echo $? > /run/s6-linux-init-container-results/exitcode
+# halt

world/s6-scripts/etc/s6/current/scripts/rc.shutdown

@@ -0,0 +1,30 @@
+#!/bin/sh -e
+
+### Things to do before hardware halt/reboot/poweroff.
+### Ideally, it should be a single call to the service manager,
+### telling it to bring all the services down.
+
+### If your s6-linux-init-maker invocation was made with the -1
+### option, messages from rc.shutdown will appear on /dev/console
+### as well as be logged by the catch-all logger.
+### If your s6-linux-init-maker invocation did NOT include the -1
+### option, messages from rc.shutdown will only be logged by the
+### catch-all logger and will NOT appear on /dev/console. In order
+### to print them to /dev/console instead, you may want to
+### uncomment the following line:
+# exec >/dev/console 2>&1
+
+### If your services are managed by sysv-rc:
+### also remove the K11reboot link from /etc/rc6.d to prevent
+### sysv-rc from rebooting prematurely - because sysvinit does
+### not properly separate state changes from system init/shutdown.
+# exec /etc/init.d/rc 6
+
+### If your services are managed by OpenRC:
+### also remove the "killprocs" and "mount-ro" symlinks from
+### /etc/runlevels/shutdown - because OpenRC does not properly
+### separate the service manager from the shutdown manager either.
+# exec /sbin/openrc shutdown
+
+### If your services are managed by s6-rc:
+exec s6-rc -bda change

world/s6-scripts/etc/s6/current/scripts/rc.shutdown.final

@@ -0,0 +1,18 @@
+#!/bin/sh -e
+
+### Things to do *right before* the machine gets rebooted or
+### powered off, at the very end of the shutdown sequence,
+### when all the filesystems are unmounted.
+
+### This is a last resort hook; normally nothing should be
+### done here (your rc.shutdown script should have taken care
+### of everything) and you should leave this script empty.
+
+### Some distributions, however, may need to perform some
+### actions after unmounting the filesystems: typically if
+### an additional teardown action is required on a filesystem
+### after unmounting it, or if the system needs to be
+### pivot_rooted before it can be shut down, etc.
+
+### Those are all exceptional cases. If you don't know for
+### certain that you need to do something here, you don't.

world/s6-scripts/etc/s6/current/scripts/runlevel

@@ -0,0 +1,18 @@
+#!/bin/sh -e
+
+### This script is called once at boot time by rc.init, and is
+### also called by the runleveld service every time the user
+### requests a machine state change via telinit.
+### Ideally, it should just be a call to the service manager.
+
+test "$#" -gt 0 || { echo 'runlevel: fatal: too few arguments' 1>&2 ; exit 100 ; }
+
+
+### If your services are managed by sysv-rc:
+# exec /etc/init.d/rc "$1"
+
+### If your services are managed by OpenRC:
+# exec /sbin/openrc "$1"
+
+### If your services are managed by s6-rc:
+exec s6-rc -up change "$1"

world/s6-scripts/etc/s6/rc.local

@@ -0,0 +1,6 @@
+#!/bin/sh
+#
+# Enter custom commands here. By default, they will be executed on startup with the
+# "boot" bundle before running services. If you need these commands to wait on certain
+# services being up, you can edit the /etc/s6/sv/rc-local/dependencies file and then
+# recompile the database.

world/s6-scripts/etc/s6/s6.conf

@@ -0,0 +1,28 @@
+# /etc/s6/s6.conf - system configuration
+
+# Set HARDWARECLOCK to UTC if your Hardware Clock is set to UTC (also known as
+# Greenwich Mean Time).  If that clock is set to the local time, then
+# set HARDWARECLOCK to localtime.  Note that if you dual boot with Windows, then
+# you should set it to localtime.
+
+HARDWARECLOCK=UTC
+
+# cgroups mode
+# legacy mounts cgroups version 1 on /sys/fs/cgroup
+# unified mounts cgroups version 2 on /sys/fs/cgroup
+# hybrid mounts cgroups version 2 on /sys/fs/cgroup/unified and
+# cgroups version 1 on /sys/fs/cgroup
+
+CGROUP_MODE=hybrid
+
+# This is a list of controllers which should be enabled for cgroups version 2.
+# If hybrid mode is being used, controllers listed here will not be
+# available for cgroups version 1. none means no controllers will be used
+
+CGROUP_CONTROLLERS=none
+
+# This switch controls whether or not cgroups version 1 controllers are
+# individually mounted under
+# /sys/fs/cgroup in hybrid or legacy mode
+
+HAVE_CONTROLLER1_GROUPS=true

world/s6-scripts/etc/s6/skel/rc.init

@@ -0,0 +1,49 @@
+#!/bin/sh -e
+
+rl="$1"
+shift
+
+### argv now contains the arguments of the kernel command line that are
+### not of the form key=value. (The key=value arguments were stored by
+### s6-linux-init into an envdir, if instructed so via the -s option.)
+### Normally this argv remains unused because programs that need the
+### kernel command line usually read it later on from /proc/cmdline -
+### but just in case, it's available here.
+
+
+### 1. Early preparation
+### This is done only once at boot time.
+### Ideally, this phase should just initialize the service manager.
+
+### If your services are managed by sysv-rc:
+# /etc/init.d/rcS
+
+### If your services are managed by OpenRC:
+# /sbin/openrc sysinit
+# /sbin/openrc boot
+
+### If your services are managed by s6-rc:
+### (replace /run/service with your scandir)
+s6-rc-init -c /etc/s6/rc/compiled /run/service
+
+
+### 2. Starting the wanted set of services
+### This is also called every time you change runlevels with telinit.
+### (edit the location to suit your installation)
+### By default, $rl is the string "default", unless you changed it
+### via the -D option to s6-linux-init-maker.
+### Numeric arguments from 1 to 5 on the kernel command line will
+### override the default.
+
+exec /etc/s6/current/scripts/runlevel "$rl"
+
+
+### If this script is run in a container, then 1. and 2. above do not
+### apply and you should just call your CMD, if any, or let your
+### services run.
+### Something like this:
+
+# if test -z "$*" ; then return 0 ; fi
+# $@
+# echo $? > /run/s6-linux-init-container-results/exitcode
+# halt

world/s6-scripts/etc/s6/skel/rc.shutdown

@@ -0,0 +1,30 @@
+#!/bin/sh -e
+
+### Things to do before hardware halt/reboot/poweroff.
+### Ideally, it should be a single call to the service manager,
+### telling it to bring all the services down.
+
+### If your s6-linux-init-maker invocation was made with the -1
+### option, messages from rc.shutdown will appear on /dev/console
+### as well as be logged by the catch-all logger.
+### If your s6-linux-init-maker invocation did NOT include the -1
+### option, messages from rc.shutdown will only be logged by the
+### catch-all logger and will NOT appear on /dev/console. In order
+### to print them to /dev/console instead, you may want to
+### uncomment the following line:
+# exec >/dev/console 2>&1
+
+### If your services are managed by sysv-rc:
+### also remove the K11reboot link from /etc/rc6.d to prevent
+### sysv-rc from rebooting prematurely - because sysvinit does
+### not properly separate state changes from system init/shutdown.
+# exec /etc/init.d/rc 6
+
+### If your services are managed by OpenRC:
+### also remove the "killprocs" and "mount-ro" symlinks from
+### /etc/runlevels/shutdown - because OpenRC does not properly
+### separate the service manager from the shutdown manager either.
+# exec /sbin/openrc shutdown
+
+### If your services are managed by s6-rc:
+exec s6-rc -bda change

world/s6-scripts/etc/s6/skel/rc.shutdown.final

@@ -0,0 +1,18 @@
+#!/bin/sh -e
+
+### Things to do *right before* the machine gets rebooted or
+### powered off, at the very end of the shutdown sequence,
+### when all the filesystems are unmounted.
+
+### This is a last resort hook; normally nothing should be
+### done here (your rc.shutdown script should have taken care
+### of everything) and you should leave this script empty.
+
+### Some distributions, however, may need to perform some
+### actions after unmounting the filesystems: typically if
+### an additional teardown action is required on a filesystem
+### after unmounting it, or if the system needs to be
+### pivot_rooted before it can be shut down, etc.
+
+### Those are all exceptional cases. If you don't know for
+### certain that you need to do something here, you don't.

world/s6-scripts/etc/s6/skel/runlevel

@@ -0,0 +1,18 @@
+#!/bin/sh -e
+
+### This script is called once at boot time by rc.init, and is
+### also called by the runleveld service every time the user
+### requests a machine state change via telinit.
+### Ideally, it should just be a call to the service manager.
+
+test "$#" -gt 0 || { echo 'runlevel: fatal: too few arguments' 1>&2 ; exit 100 ; }
+
+
+### If your services are managed by sysv-rc:
+# exec /etc/init.d/rc "$1"
+
+### If your services are managed by OpenRC:
+# exec /sbin/openrc "$1"
+
+### If your services are managed by s6-rc:
+exec s6-rc -up change "$1"

world/s6-scripts/etc/s6/sv/agetty-tty1/conf

@@ -0,0 +1,5 @@
+# Option to actually spawn the getty when the service starts. Set to "yes" to enable.
+SPAWN="yes"
+
+# User to autologin as. Leave blank to disable.
+USER=""

world/s6-scripts/etc/s6/sv/agetty-tty1/dependencies

@@ -0,0 +1 @@
+hostname

world/s6-scripts/etc/s6/sv/agetty-tty1/run

@@ -0,0 +1,8 @@
+#!/sbin/execlineb -P
+if { pipeline { redirfd -w 2 /dev/null s6-rc -a list } grep -qFx mount-filesystems }
+envfile /etc/s6/sv/agetty-tty1/conf
+importas -iu SPAWN SPAWN
+importas -iu USER USER
+if -t { test ${SPAWN} = "yes" }
+	ifelse -X { test ${USER} = "" }
+	{ exec agetty -L -8 tty1 115200 } exec agetty -L -8 tty1 115200 -a ${USER}

world/s6-scripts/etc/s6/sv/agetty-tty1/type

@@ -0,0 +1 @@
+longrun

world/s6-scripts/etc/s6/sv/agetty-tty2/conf

@@ -0,0 +1,5 @@
+# Option to actually spawn the getty when the service starts. Set to "yes" to enable.
+SPAWN="yes"
+
+# User to autologin as. Leave blank to disable.
+USER=""

world/s6-scripts/etc/s6/sv/agetty-tty2/dependencies

@@ -0,0 +1 @@
+hostname

world/s6-scripts/etc/s6/sv/agetty-tty2/run

@@ -0,0 +1,8 @@
+#!/sbin/execlineb -P
+if { pipeline { redirfd -w 2 /dev/null s6-rc -a list } grep -qFx mount-filesystems }
+envfile /etc/s6/sv/agetty-tty2/conf
+importas -iu SPAWN SPAWN
+importas -iu USER USER
+if -t { test ${SPAWN} = "yes" }
+	ifelse -X { test ${USER} = "" }
+	{ exec agetty -L -8 tty2 115200 } exec agetty -L -8 tty2 115200 -a ${USER}

world/s6-scripts/etc/s6/sv/agetty-tty2/type

@@ -0,0 +1 @@
+longrun

world/s6-scripts/etc/s6/sv/agetty-tty3/conf

@@ -0,0 +1,5 @@
+# Option to actually spawn the getty when the service starts. Set to "yes" to enable.
+SPAWN="yes"
+
+# User to autologin as. Leave blank to disable.
+USER=""

world/s6-scripts/etc/s6/sv/agetty-tty3/dependencies

@@ -0,0 +1 @@
+hostname

world/s6-scripts/etc/s6/sv/agetty-tty3/run

@@ -0,0 +1,8 @@
+#!/sbin/execlineb -P
+if { pipeline { redirfd -w 2 /dev/null s6-rc -a list } grep -qFx mount-filesystems }
+envfile /etc/s6/sv/agetty-tty3/conf
+importas -iu SPAWN SPAWN
+importas -iu USER USER
+if -t { test ${SPAWN} = "yes" }
+	ifelse -X { test ${USER} = "" }
+	{ exec agetty -L -8 tty3 115200 } exec agetty -L -8 tty3 115200 -a ${USER}

world/s6-scripts/etc/s6/sv/agetty-tty3/type

@@ -0,0 +1 @@
+longrun

world/s6-scripts/etc/s6/sv/agetty-tty4/conf

@@ -0,0 +1,5 @@
+# Option to actually spawn the getty when the service starts. Set to "yes" to enable.
+SPAWN="yes"
+
+# User to autologin as. Leave blank to disable.
+USER=""

world/s6-scripts/etc/s6/sv/agetty-tty4/dependencies

@@ -0,0 +1 @@
+hostname

world/s6-scripts/etc/s6/sv/agetty-tty4/run

@@ -0,0 +1,8 @@
+#!/sbin/execlineb -P
+if { pipeline { redirfd -w 2 /dev/null s6-rc -a list } grep -qFx mount-filesystems }
+envfile /etc/s6/sv/agetty-tty4/conf
+importas -iu SPAWN SPAWN
+importas -iu USER USER
+if -t { test ${SPAWN} = "yes" }
+	ifelse -X { test ${USER} = "" }
+	{ exec agetty -L -8 tty4 115200 } exec agetty -L -8 tty4 115200 -a ${USER}

world/s6-scripts/etc/s6/sv/agetty-tty4/type

@@ -0,0 +1 @@
+longrun

world/s6-scripts/etc/s6/sv/agetty-tty5/conf

@@ -0,0 +1,5 @@
+# Option to actually spawn the getty when the service starts. Set to "yes" to enable.
+SPAWN="yes"
+
+# User to autologin as. Leave blank to disable.
+USER=""

world/s6-scripts/etc/s6/sv/agetty-tty5/dependencies

@@ -0,0 +1 @@
+hostname

world/s6-scripts/etc/s6/sv/agetty-tty5/run

@@ -0,0 +1,8 @@
+#!/sbin/execlineb -P
+if { pipeline { redirfd -w 2 /dev/null s6-rc -a list } grep -qFx mount-filesystems }
+envfile /etc/s6/sv/agetty-tty5/conf
+importas -iu SPAWN SPAWN
+importas -iu USER USER
+if -t { test ${SPAWN} = "yes" }
+	ifelse -X { test ${USER} = "" }
+	{ exec agetty -L -8 tty5 115200 } exec agetty -L -8 tty5 115200 -a ${USER}

world/s6-scripts/etc/s6/sv/agetty-tty5/type

@@ -0,0 +1 @@
+longrun

world/s6-scripts/etc/s6/sv/agetty-tty6/conf

@@ -0,0 +1,5 @@
+# Option to actually spawn the getty when the service starts. Set to "yes" to enable.
+SPAWN="yes"
+
+# User to autologin as. Leave blank to disable.
+USER=""

world/s6-scripts/etc/s6/sv/agetty-tty6/dependencies

@@ -0,0 +1 @@
+hostname

world/s6-scripts/etc/s6/sv/agetty-tty6/run

@@ -0,0 +1,8 @@
+#!/sbin/execlineb -P
+if { pipeline { redirfd -w 2 /dev/null s6-rc -a list } grep -qFx mount-filesystems }
+envfile /etc/s6/sv/agetty-tty6/conf
+importas -iu SPAWN SPAWN
+importas -iu USER USER
+if -t { test ${SPAWN} = "yes" }
+	ifelse -X { test ${USER} = "" }
+	{ exec agetty -L -8 tty6 115200 } exec agetty -L -8 tty6 115200 -a ${USER}

world/s6-scripts/etc/s6/sv/agetty-tty6/type

@@ -0,0 +1 @@
+longrun

world/s6-scripts/etc/s6/sv/binfmt/dependencies

@@ -0,0 +1 @@
+mount-procfs

world/s6-scripts/etc/s6/sv/binfmt/shell_up

@@ -0,0 +1,15 @@
+#!/bin/sh
+
+mountpoint -q /proc/sys/fs/binfmt_misc || \
+mount -t binfmt_misc binfmt /proc/sys/fs/binfmt_misc
+
+for path in /usr/lib/binfmt.d /etc/binfmt.d /run/binfmt.d; do
+    [ ! -d $path ] && continue
+    [ -z "$(ls $path)" ] && continue
+    grep -h "^:" $path/* | \
+        while read -r line; do
+            reg=${line#*:}
+            [ -e /proc/sys/fs/binfmt_misc/${reg%%:*} ] && echo -1 > /proc/sys/fs/binfmt_misc/${reg%%:*}
+            printf "%s" "$line" > /proc/sys/fs/binfmt_misc/register
+        done
+done

world/s6-scripts/etc/s6/sv/binfmt/type

@@ -0,0 +1 @@
+oneshot

world/s6-scripts/etc/s6/sv/binfmt/up

@@ -0,0 +1,2 @@
+#!/sbin/execlineb -P
+foreground { sh /etc/s6/sv/binfmt/shell_up }

world/s6-scripts/etc/s6/sv/boot/contents

@@ -0,0 +1,4 @@
+udev
+mount
+misc
+setup

world/s6-scripts/etc/s6/sv/boot/type

@@ -0,0 +1 @@
+bundle

world/s6-scripts/etc/s6/sv/cleanup/type

@@ -0,0 +1 @@
+oneshot

world/s6-scripts/etc/s6/sv/cleanup/up

@@ -0,0 +1,5 @@
+#!/sbin/execlineb -P
+foreground { install -m0664 -o root -g utmp /dev/null /run/utmp }
+foreground { if -t -n { test -e /var/log/wtmp } install -m0664 -o root -g utmp /dev/null /var/log/wtmp }
+foreground { if -t -n { test -e /var/log/btmp } install -m0600 -o root -g utmp /dev/null /var/log/btmp }
+foreground { rm -f /etc/nologin /forcefsck /forcequotacheck /fastboot }

world/s6-scripts/etc/s6/sv/console-setup/dependencies

@@ -0,0 +1 @@
+early-getty-down

world/s6-scripts/etc/s6/sv/console-setup/shell_up

@@ -0,0 +1,16 @@
+#!/bin/sh
+
+[ -r /etc/vconsole.conf ] && . /etc/vconsole.conf
+TTYS=${TTYS:-6}
+_index=0
+while [ ${_index} -le $TTYS ]; do
+    if [ -n "$FONT" ]; then
+        setfont ${FONT_MAP:+-m $FONT_MAP} ${FONT_UNIMAP:+-u $FONT_UNIMAP} \
+                $FONT -C "/dev/tty${_index}"
+    fi
+    printf "\033%s" "%G" >/dev/tty${_index}
+    _index=$((_index + 1))
+done
+if [ -n "$KEYMAP" ]; then
+    loadkeys -q -u ${KEYMAP}
+fi

world/s6-scripts/etc/s6/sv/console-setup/type

@@ -0,0 +1 @@
+oneshot

world/s6-scripts/etc/s6/sv/console-setup/up

@@ -0,0 +1,2 @@
+#!/sbin/execlineb -P
+exec sh /etc/s6/sv/console-setup/shell_up

world/s6-scripts/etc/s6/sv/default/contents

@@ -0,0 +1 @@
+boot

world/s6-scripts/etc/s6/sv/default/type

@@ -0,0 +1 @@
+bundle

world/s6-scripts/etc/s6/sv/dmesg/conf

@@ -0,0 +1,2 @@
+# This configures the directives used for s6-log in the log service.
+DIRECTIVES="n3 s2000000 T"

world/s6-scripts/etc/s6/sv/dmesg/dependencies

@@ -0,0 +1 @@
+remount-root

world/s6-scripts/etc/s6/sv/dmesg/type

@@ -0,0 +1 @@
+oneshot

world/s6-scripts/etc/s6/sv/dmesg/up

@@ -0,0 +1,5 @@
+#!/sbin/execlineb -P
+foreground { if -n -t { test -d /var/log/dmesg } install -d -m 0755 -o s6log -g s6log /var/log/dmesg }
+envfile /etc/s6/sv/dmesg/conf
+importas -sCiu DIRECTIVES DIRECTIVES
+pipeline { dmesg } s6-setuidgid s6log exec -c s6-log -b -- ${DIRECTIVES} /var/log/dmesg

world/s6-scripts/etc/s6/sv/early-getty-down/dependencies

@@ -0,0 +1 @@
+agetty-tty1

world/s6-scripts/etc/s6/sv/early-getty-down/type

@@ -0,0 +1 @@
+oneshot

world/s6-scripts/etc/s6/sv/early-getty-down/up

@@ -0,0 +1,2 @@
+#!/sbin/execlineb -P
+exec s6-svc -d /run/service/s6-linux-init-early-getty

world/s6-scripts/etc/s6/sv/getty/contents

@@ -0,0 +1,6 @@
+agetty-tty1
+agetty-tty2
+agetty-tty3
+agetty-tty4
+agetty-tty5
+agetty-tty6

world/s6-scripts/etc/s6/sv/getty/type

@@ -0,0 +1 @@
+bundle

world/s6-scripts/etc/s6/sv/hostname/dependencies

@@ -0,0 +1 @@
+mount-procfs

world/s6-scripts/etc/s6/sv/hostname/type

@@ -0,0 +1 @@
+oneshot

world/s6-scripts/etc/s6/sv/hostname/up

@@ -0,0 +1,3 @@
+#!/sbin/execlineb -P
+if -t { test -s /etc/hostname } backtick -n -E HOSTNAME { head -1 /etc/hostname }
+if -t { test -n $HOSTNAME } redirfd -w 1 /proc/sys/kernel/hostname echo $HOSTNAME

world/s6-scripts/etc/s6/sv/hwclock/down

@@ -0,0 +1,5 @@
+#!/sbin/execlineb -P
+envfile /etc/s6/s6.conf
+importas -iu HARDWARECLOCK HARDWARECLOCK
+foreground { if { test $HARDWARECLOCK = UTC } hwclock --systohc --utc --noadjfile }
+foreground { if { test $HARDWARECLOCK = localtime } hwclock --systohc --localtime --noadjfile }

world/s6-scripts/etc/s6/sv/hwclock/type

@@ -0,0 +1 @@
+oneshot